We are Brokering this vintage Arp 2600 + 3620 duo-phonic keyboard for and on behalf of our UK client.

Came into stock: Available from RL Music from November 2024

Servicing Status:  A full service was carried out by Kent Spong at KSR in August 2024. 

Remarks:

We present the excellent condition vintage Arp 2600 semi-modular which contains the sought after (and so-called) post-lawsuit Moog 4072 style filter. This instrument is at least 50 years old (built between 1972 and 1974) looks beautifully vintage and sounds amazing.

This Arp 2600 is a version 2600P v4.0, with the post-lawsuit 4072 Filter + 3620 Duo-Phonic Keyboard controller. It features Semi-normalised – 3 VCOs (type 4027-1), 4 pole Lowpass VCF, VCA, Ring Modulator, 2 EGs, sample & hold Noise, Mic Preamp, 17-inch Spring Reverb, Voltage Processor and Four Octave Keyboard….the list goes on.

This Arp system has been in the ownership of our client for only around 5 years having got it from the original owner who purchased it new. This 2600 has never been gigged and is 100% original, so has all its original tolex and original circuitry.  When our Client purchased this Arp, it had been stored for several years so KSR was commissioned to carry out a complete overhaul to get it up to spec and ready for sale through us.

Buying a vintage ARP 2600 synthesizer is a fantastic choice for several reasons, especially if you’re passionate about analogue synthesizers and classic sound design. Here’s why:

1. Classic Analog Sound

• The ARP 2600 has a rich, warm analogue tone that is nearly impossible to replicate digitally. Its oscillators, filters, and modulators create a sound that is both iconic and versatile.
• Many famous musicians and sound designers have used the ARP 2600, making it a staple in the history of synthesizers.

2. Historical and Collectible Value

• Released in the early 1970s, it is a piece of synthesizer history. Owning one is like having a relic of the golden era of analogue synthesis.
• As vintage gear, its value often increases over time, making it not just a tool but also an investment.

3. Hands-On Creativity

• The semi-modular design lets you patch your signal paths while still being usable without patch cables. This strikes a perfect balance between modular flexibility and ease of use.
• The tactile interface encourages experimentation and sound design.

4. Build Quality

• Vintage ARP 2600s were built to last, with solid construction and high-quality components. Properly maintained, they can continue to produce amazing sounds for decades.

5. Unique Features

• Features like the built-in spring reverb and iconic ARP filter (which varies depending on the production year) make it distinct from modern synthesizers.
• The integration of pre-patched configurations and modular flexibility offers unmatched creative opportunities.

6. Cultural Significance

• It has been used in countless classic tracks across genres and is famous for being the voice of R2-D2 in Star Wars. Owning one connects you to this legacy.

Cosmetic Condition:

The control surfaces/panels on the synth & keyboard have been deep cleaned and are in outstanding condition and retain all original slider-caps and controls. All the cabinets/lids for both the synth and keyboard are covered with the original factory-fitted tolex, which is all in excellent condition. These 50-year-old portable semi-modular synthesisers are hard to find in original condition like this so it’s a fantastic opportunity to buy a genuine vintage 2600 that’s in factory spec. 

The bright work (nickel-plated components like catches and hinges) are all original and all show a perfectly aged patina.

Notes on the Servicing:

Kent at KSR has gone through the entire synth and keyboard. Many original parts were retained to ensure continuity and authenticity but some ageing components like power conditioning caps have been replaced, but only were necessary. all the sliders and potentiometers had been deep cleaned and a full function test of every PCB. 

The keyboard was stripped and completely overhauled, and new neoprene bushes were fitted etc.

The original 3620 keyboard is certainly useful and is the historically correct partner for this model of 2600. The 3620 offers duo-phonic control and pretty decent access to the extensive inputs into the main synth, so to get the most out of the 2600 we would recommend using a multi-channel Midi to CV device like the Kenton Pro-2000 which can give you 3-note polyphonic control if needed, although any 1V/Oct analogue controller/sequencer etc., will work fine.

This is a fantastic opportunity to buy one of the most iconic vintage synths ever made with its, completely original control surface cosmetics, original factory-fitted tolex and the unmodified and paired synth and keyboard. The sales price has been agreed with our client to keep it very competitive and by far the best value comparable example in the UK and Europe at the time of posting this page.

These outstanding vintage semi-modular synthesizers are hard to find in decent condition, so here is a rare opportunity to own an original example that will only appreciate and add something special to your studio/home.

Supplied with all lids, OE keyboard CV/Gate interconnect cable and UK type- to-3-pin proprietary power cable. The Arp runs on EU 220~240V.  We also supply the original colour-printed Arp 2600 owner’s manual (pictured below).

All our vintage instruments are sold with a 3-month warranty, please see our Terms & Conditions for full details.

Packing & Shipping: 

We can ship this 2600 worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so they are subject to quotation.  The synth is located with us in Reading, so you are welcome to collect it from us if you prefer.

There may be short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements, so please email us if you have any questions about the logistics and/or need a quote.

Price: £9,990 GBP

Availability: This Arp 2600 & 3620 Keyboard Controller is available for sale now.

Click on the thumbnails for higher-resolution photos of the actual synth for sale.

We are Brokering this Arp 2600 + 3604-p keyboard for and on behalf of our UK client.

Came into stock: Available from RL Music from July 2024

Servicing Status:  A full service was carried out by Kent Spong at KSR in July 2024. 

Remarks:

We present the excellent condition vintage Arp 2600 semi-modular which contains the sought after (and so-called) pre-lawsuit Moog 4012 style filter. This instrument is at least 50 years old (built between 1972 to 1974) looks beautifully vintage and sounds absolutely amazing.

This Arp 2600 is a version 2600P v3.0, with original 4012 Filter + 3604P Keyboard controller. It features Semi-normalised – 3 VCOs (type 4027-1), 4 pole Lowpass VCF, VCA, Ring Modulator, 2 EGs, sample & hold Noise, Mic Preamp, 17 inch Spring Reverb, Voltage Processor and Four Octave Keyboard….the list goes on.

This Arp system has been in the ownership of our client’s family for many years but had been stored for quite a while, so KSR was commissioned to carry out a complete overhaul to get it up to spec and ready for sale through us. Details of the work carried out as follows:

Cosmetic Condition:

The control surfaces/panels on the synth & keyboard has been deep cleaned and are in outstanding condition and retain all original slider-caps and controls. To retain authenticity. It looks like the cabinets/lids for both the synth and keyboard have been re-tolexed at some point in the past, and the condition of that tolex is excellent. The Tolexing was not done by KSR, but whomever carried it out was certainly skilled as it’s been very well cared out.  

The bright-work (nickel-plated components like catches and hinges) are all original and all show a perfectly aged patina.

Notes on the Servicing:

Kent at KSR has gone through the entire synth and keyboard. As may original parts were retained to ensure continuity and authenticity but some ageing components like power conditioning caps have been replaced, but only were absolutely necessary. all the sliders and potentiometers had been deep cleaned and a full function test of every PCB.  There was a fault on one of the (potted)  4027-1 VCO’s, which is why it is un-potted (see photos on the circuit boards below), but that has been fixed using NOS parts.

The keyboard was stripped and completely overhauled, and new neoprene bushes fitted etc.

The original 3604P keyboard is certainly useful, and is the historically correct partner for this model of 2600. The 3604-P offers limited access to the extensive inputs into the main synth, so to get the most out of the 2600 we would recommend using a multi-channel Midi to CV device like the Kenton Pro-2000 which can give you 3 note polyphonic control if needed, although any 1V/Oct analogue controller/sequencer etc., will work fine.

This is a fantastic opportunity to buy one of the most iconic vintage synths ever made with its, completely original control surface cosmetics, unmodified and paired synth and keyboard. The sales price has been agreed with our client to keep it very competitive and by far the best value example in the UK and Europe at the time of posting this page.

These outstanding vintage semi-modular synthesizers are hard to find in decent condition, so here is a rare opportunity to own an original example that will only appreciate in value and add something special to your studio/home.

Supplied with all lids, some assorted OE 3.5mm jacks, OE keyboard CV/Gate interconnect cable and UK type- to-3-pin proprietary power-cable. The Arp runs on EU 220~240V.  We also supply an Arp 2600 owners manual (PDF).

All our vintage instruments are sold with a 3 months warranty, please see our Terms & Conditions for full details.

Price: £8,990 GBP

Availability: This Arp 2600 & 3604-P Keyboard Controller are available for sale now.

Click on the thumbnails for higher resolution photos of actual synth for sale.

BUY THIS ARP 2600

We are Brokering this instrument for and on behalf of our UK customer

Servicing Status: Full health check by KSR was carried out in January 2021.

Remarks: A really nice condition example of the sampler that started off the legendary series: The Emulators, from E-mu Systems from 1981 until the 1990s.

The Emulator 1 was a truly groundbreaking instrument that is commonly considered to have started a music revolution in the use of samplers in popular music. Early adopters were some of the biggest names in the industry, like Michael Jackson (Quincy Jones), Stevie Wonder, Genesis, etc. There’s plenty about the history that can be found online, but the Emulator 1 is something very special, for a number of good reasons.

The Model number of this Emulator 1 is 6008 (serial #242- out of 500 built), which makes this a later production version 8 Voice system, built around 1983. The unique architecture of the E1 delivers the 8 voices in a 5/3 keyboard split, so 5 voices in the lower half, 3 at the top above the mid-point keyboard split.

The E1 comes has been modified with a brand new HxC SD floppy emulator fitted, so it has a library loaded onto an SD card that boots up with the E1, so no floppy discs are needed.  The SD card modification/upgrade was carried out by Synthprof (Andy Jury) in the UK in 2019 (original printed receipt supplied upon sale).

This is a very useful modification and enables the loading of library sounds a quick and simple process, and the system boots up from the card. This E1 also has the RS232 port fitted, so with the right software/hardware, you can access normally the system remotely.

Our client has not owned this Emulator 1 very long, having purchased it as a fully serviced example from a UK synth dealer (not us) in August 2019, but he commissioned KSR to fully health-check the sampler in 2020.  Once this is sold, we will ask KSR to fully check the E1 for us to ensure everything is 100% before sending it out to the new owner.

It looks to have been well cared for and, cosmetically speaking, is in good condition with only the expected amount of wear to the painted metal cabinet, although it looks to have had some treatment at some point to the rear/back panel. All the controls work perfectly, and the load/play/sampling functions are 100% thanks to the SD card upgrade, so it’s good to go.

This E1 is also supplied with 24 original 5&1/4” floppy discs, although these library files are already loaded on the SD card. There is a switch on the back so you can toggle between using the SD or original floppy drive if you wish.

This Emulator 1 operates on EU220V or US110V (switchable). We will include an IEC power cable.

We can be shipped to most destinations worldwide.

Packing & Shipping: We can ship this worldwide, although the packing & shipping cost is not included in the sale price below, and is subject to quotation.  We are happy to discuss your requirements so please email us if you have any questions on the logistics.

Sales Price: £3,300 GBP

As this is a brokered sale, VAT is not applicable on the sale of this E1 to UK buyers, however, the packing & shipping/insurance costs are subject to VAT @ 20%, should you need the goods shipped to you.  The E1 can be available for collection from us directly in the South of England (Reading, Berkshire).

Availability: This Emulator 1 is available for sale now.

Note on pictures, due to Covid: Click on the thumbnail for a higher resolution photo of the actual Emulator 1 for sale.  Due to the Covid-19 restrictions, Kent has offered to photograph the E1 at his premises in Surrey, so these photos come straight from him using the best photo equipment he has available. It’s our workaround for the Covid issues/restrictions and we’re very grateful to Kent for helping us all out.

If you require specific pictures not already featured of the instrument then please contact us so we can request that Kent at KSR can accommodate your request, but there may be a short delay in getting this done for us/you.

BUY THIS EMULATOR 1/button]