Arp 2600 v3.0 &...

We are Brokering this Arp 2600 + 3604-p keyboard for and on behalf of our UK client.

Came into stock: Available from RL Music from July 2024

Servicing Status:  A full service was carried out by Kent Spong at KSR in July 2024. 

Remarks:

We present the excellent condition vintage Arp 2600 semi-modular which contains the sought after (and so-called) pre-lawsuit Moog 4012 style filter. This instrument is at least 50 years old (built between 1972 to 1974) looks beautifully vintage and sounds absolutely amazing.

This Arp 2600 is a version 2600P v3.0, with original 4012 Filter + 3604P Keyboard controller. It features Semi-normalised – 3 VCOs (type 4027-1), 4 pole Lowpass VCF, VCA, Ring Modulator, 2 EGs, sample & hold Noise, Mic Preamp, 17 inch Spring Reverb, Voltage Processor and Four Octave Keyboard….the list goes on.

This Arp system has been in the ownership of our client’s family for many years but had been stored for quite a while, so KSR was commissioned to carry out a complete overhaul to get it up to spec and ready for sale through us. Details of the work carried out as follows:

Cosmetic Condition:

The control surfaces/panels on the synth & keyboard has been deep cleaned and are in outstanding condition and retain all original slider-caps and controls. To retain authenticity. It looks like the cabinets/lids for both the synth and keyboard have been re-tolexed at some point in the past, and the condition of that tolex is excellent. The Tolexing was not done by KSR, but whomever carried it out was certainly skilled as it’s been very well cared out.  

The bright-work (nickel-plated components like catches and hinges) are all original and all show a perfectly aged patina.

Notes on the Servicing:

Kent at KSR has gone through the entire synth and keyboard. As may original parts were retained to ensure continuity and authenticity but some ageing components like power conditioning caps have been replaced, but only were absolutely necessary. all the sliders and potentiometers had been deep cleaned and a full function test of every PCB.  There was a fault on one of the (potted)  4027-1 VCO’s, which is why it is un-potted (see photos on the circuit boards below), but that has been fixed using NOS parts.

The keyboard was stripped and completely overhauled, and new neoprene bushes fitted etc.

The original 3604P keyboard is certainly useful, and is the historically correct partner for this model of 2600. The 3604-P offers limited access to the extensive inputs into the main synth, so to get the most out of the 2600 we would recommend using a multi-channel Midi to CV device like the Kenton Pro-2000 which can give you 3 note polyphonic control if needed, although any 1V/Oct analogue controller/sequencer etc., will work fine.

This is a fantastic opportunity to buy one of the most iconic vintage synths ever made with its, completely original control surface cosmetics, unmodified and paired synth and keyboard. The sales price has been agreed with our client to keep it very competitive and by far the best value example in the UK and Europe at the time of posting this page.

These outstanding vintage semi-modular synthesizers are hard to find in decent condition, so here is a rare opportunity to own an original example that will only appreciate in value and add something special to your studio/home.

Supplied with all lids, some assorted OE 3.5mm jacks, OE keyboard CV/Gate interconnect cable and UK type- to-3-pin proprietary power-cable. The Arp runs on EU 220~240V.  We also supply an Arp 2600 owners manual (PDF).

All our vintage instruments are sold with a 3 months warranty, please see our Terms & Conditions for full details.

Price: £8,990 GBP

Availability: This Arp 2600 & 3604-P Keyboard Controller are available for sale now.

Click on the thumbnails for higher resolution photos of actual synth for sale.

BUY THIS ARP 2600

Oberheim Xpander

We are Brokering this instrument for and on behalf of our UK customer

Coming into stock: Came into stock in May 2024.

Servicing Status: KSR have carried out a service on this Xpander in May 2024.

Remarks: Much has been written on these incredible synthesizers and it’s understandable when you use them as they really can deliver a thick analogue wall of sound, and are perfect pad and brass sources just for starters.

The Xpander lineage includes the Matrix 6 and 12 and is a fully midi configured, 6 voice Polysynth – an excellent addition to any analogue set-up and has to be heard to be believed. he Xpander offers a deep programmable architecture for those of you into tweaking but can also be a very user-friendly hands-on preset machine.  This means they sit between that digital and analogue medium perfectly and are arguably the best of the hybrid technology of the early to mid-1980s.

About This Xpander:

This example is a USA built unit that works perfectly, and as mentioned above, has just been fully serviced by KSR.  The cosmetic condition is all original and absolutely first class, excellent, as you can see from the pictures below, with barely any perceptible marks or signs of use, which is quite remarkable for a 40+ year old music instrument.

The owner purchased a Star Dust cover for it a few years ago and it is supplied with the synth on-sale.  The cover is well used and has done a fantastic job protecting the instrument.

We are Brokering this Xpander for a private owner whom imported from the USA in 2016. It has only ever been used in a home studio environment since. 

The Xpander runs on US115~230V (switchable), is supplied with an IEC cable with UK-plug fitted and photocopy of the June 1984 user manual by Daniel Soferan. In addition, an original factory presets cassette is also supplied.

Packing & Shipping: 

We can ship this Xpander worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so they are subject to quotation.  The synth is located with us in Reading, so you are welcome to collect it from us if you prefer.

There may be short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements, so please email us if you have any questions about the logistics and/or need a quote.

Price: £4,150 GBP

As this is a brokered sale, VAT does not apply to UK buyers. However, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped.

Availability: 

This Xpander is now SOLD. This listing was updated on 4th August 2024 @ 10:02 GMT.

Click on the thumbnail for a higher-resolution photo of the actual Oberheim Xpander for sale.

BUY THIS OBERHEIM XPANDER

Roland Jupiter 6 Eur...

We are Brokering this instrument for and on behalf of our UK customer

Coming into stock: February 2024.

Servicing Status: Serviced Feb 2024.

Remarks: This Jupiter 6 (serial # 333020) was purchased by our client some years ago and is only ever used in the home.  The cosmetic condition is excellent, and the whole synth only shows light indications of use with some marks to the panels, which we hope the photos provided will show, but this is a high-quality 40 years old vintage instrument.

The Jupiter 6 has been a hugely popular polysynth since it arrived in 1983. It offers aficionados that beautiful vintage polyphonic analogue Roland sound for a very reasonable cost compared to its sibling, the Jupiter 8.  Prices for these models in recent years have seen a significant uplift as vintage polysynths are getting rarer and rarer to find in good condition.

Our client, the owner of the synth, purchased it in 2005 from a UK seller, and this being a 240V machine would suggest it’s always been in the UK, so not an import. The JP6 has never been gigged, and the cosmetic condition stands as a testament to it being exceptionally well cared for throughout its 40 years since manufacture. 

This JP6 has the hugely popular Europa Modification implemented, which expands the capability of this already superb vintage polysynth; we also have printed copies of the Europa User manuals, which we will supply upon sale to the new owner. Additionally, the original aluminium end-cheeks have been overlayed with retro-style hardwood wood pieces, which are in excellent shape.  This ‘bolt-on’ cosmetic mod can be removed if unwanted, but it’s something we have seen on a few JP6, and it either adds or subtracts to the synth, which depends on your viewpoint. 

The Jupiter 6 is a professional-grade vintage instrument that’s only ever going to become more sought after and rarer, so here is your opportunity to buy a beautiful condition example, fresh from the hands of a master synth-tech (Kent Spong) and fully guaranteed by RL Music.

This Jupiter 6 is sold through RL Music with a 3-month warranty and operates on EU 220V~240V, and is supplied with an IEC power cable (UK 3-pin type) and the flight case pictured.

Packing & Shipping: 

We can ship this JP6 worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so they are subject to quotation.  The synth s located with us in Reading, so you are welcome to collect if from us if you prefer.

There may be short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements, so please email us if you have any questions about the logistics and/or need a quote.

Price: £5,900 GBP

As this is a brokered sale, VAT does not apply to UK buyers. However, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped.

Availability:

This Jupiter 6 is available for sale now.

Click on the thumbnail for a higher-resolution photo of the actual Jupiter 6 for sale.

BUY THIS JUPITER 6

Korg Trident Mk1

We are Brokering this instrument for and on behalf of our UK customer

Came into stock: January 2024.

Servicing Status: 

A service will be carried out by Kent Spong at KSR upon completion of the sale. 

Remarks: 

The original Mk1 Korg Trident is a wonderful vintage instrument packed with a load of character, and being SSM technology based, the Synth, Brass and String Machine and packed full of modulation, voicing and timbre controls as well as onboard effects in the form of an absolute killer Flanger and beautiful Ensemble.  Simply…It’s gorgeous!

Being a Korg, the build quality of this early 1980s produced synth was very high, a testament to the fact that it’s still working perfectly with all the original controls working perfectly and all present.

This Trident Mk1 has been in our client’s ownership since brand new, so a single owner machine, and in their own words ‘only ever very lightly used at home,’ which is clearly evident from the pristine condition. .  The operational condition is perfect, so the synth only needs a light service to re-cap the power-supply and put a new battery in, which we will carry out post-sale for the new owner.  

The cosmetic condition is the headline here as it’s genuinely in as-new condition, quite remarkable and without any doubt, the finest example vintage synth we have ever had the pleasure of selling. 

The last thing to note is that the owner had kept the original retail packaging for this beautiful condition instrument, so it’s will be supplied with this to the new owner. If we do end up shipping this to whomever buys it then we would purchase an outer-box to offer some additional protection to the synth and to preserve the OE packaging as that does add to its collectability.

This collectors piece is sold through RL Music with a 3-month warranty. This is a 220~240V machine that is powered via its internally wired power-cable to a uK 3-pin plug. Included in the sale is the original owners manual, which is also in excellent condition and a Korg foot-switch

Packing & Shipping: 

As mentioned above, the Trident requires a service to principally cover any future proofing needs, and a new battery, so this work will add a couple of weeks to the timeline in terms of completing the sale. We will require the sale to have been completed before this will be undertaken.

We can ship this Trident worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  There may be some short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote.

Sales Price: 

£3,990 GBP

As this is a brokered sale, VAT is not applicable on the sale of this Trident to UK buyers, however, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped to you.

Availability: 

This Korg Trident Mk1 is now SOLD.  This listing was updated on 7th Februaty 2024 at 12:11 GMT.

Click on the thumbnail for a higher resolution photo of the actual Trident for sale.  If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you as the instrument is currently in secure storage.

BUY THIS TRIDENT MK1

Roland TR-909

We are Brokering this instrument for and on behalf of our UK customer

Came into stock: January 2024.

Servicing Status: 

A full service was carried out by Ben Rossborough at Cyberwave EMS on 22nd October 2023, 

Remarks: 

The TR-909 is simply a classic sounding analogue drum machine and used by a huge array of top artists with thousands of reviews on-line so we’re not going to tell you anything new here. Most professional musicians we know have at least 2 or even 3 of these machines and they usually get very heavy studio and live use which is a testament to the rugged, stable and reliable design from Roland in the mid 80s.

Our client has owned this TR-909 for a few years having rescued it from a secondary school music department clearcut as it was marked for being thrown out, so we’d say that was a really very good save and result.

MIDI was fitted as standard by Roland on these models.

This TR-909 is fully operational and the cosmetic presentation (see pictures below) is very good with some marks/wear and signs of it age (39+ years), and the name of the school was etched into the base of the machine but it’s not visible when in use. Also, someone has used indelible pen indicating that the unit is fully earthed….good to know.

This is a good honest example that works perfectly and very recently has recently had a full service and battery fitted, and the price has been agreed with our client to reflect the condition, so is the best value TR-909 available in the world right now, being sold from a specialist dealer.

This TR-909 is sold through RL Music with a 3-month warranty. This is a 220~240V machine that is powered via a standard IEC cable, so it will not require a step-down transformer for UK or EU buyers.  Included in the sale is the original owners manual, which is a little worn but intact and we will include a brand new IEC power-cable as well in the price.  

Packing & Shipping: 

We can ship this TR-909 worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  There may be some short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote.

Sales Price: 

£4,500 GBP

As this is a brokered sale, VAT is not applicable on the sale of this TR-909 to UK buyers, however, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped to you.

Availability: 

This TR-909 is now SOLD.  This listing was udate on 10th April 2024 @ 10:10 GMT.

Click on the thumbnail for a higher resolution photo of the actual TR-909 for sale.  If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you as the instrument is currently in secure storage.

BUY THIS TR-909

Roland Juno 106

We are Brokering this instrument for and on behalf of our UK client.

Came into stock: 

December 2023

Service Status: 

A full service was carried out by Ben Rossborough at Cyberwave EMS in November 2023, including it being retrofitted with the 80017A VCF VCA Juno-106 voice chip Filter IC clones from Analogue Renaissance.

Remarks: 

Without any doubt a true vintage synth and a very useable and practical analogue polysynth keyboard for live use as well as studio.  The is among the first factory fitted MIDI synths from Roland in the early 80s, and with its on-board effects (chorus) and a really warm 24db/Oct filter, it sounds (and is) really retro whilst the DCO’s provide strong tuning stability.

The more advanced MIDI control on the 106 (SysEx) means you can use external patch-editors (Mac & PC) although in truth it’s not all that complex to program from the front panel…which is a big part of the joy of owing a vintage synth like this.

Background:

Our client purchased this many years ago, and the Juno 106 had only ever been used at his home but they now work abroad so the synth had been stored away for some time. It was recently sent over to Ben at Cyberwave for a full service as it had been stored for a while, and the full suite of brand new VCF/VCA installed as mentioned above, so it’s a  good to go.

Condition:

The cosmetic condition is outstanding, excellent as you can see from the photos included in this listing that we took. 

Health-Check & Servicing:

Operationally it’s 100% having just had a full service. 

This Juno 106 is a EU220V machine, we will supply a UK type plug IEC cable.  We also have the original Roland Juno 106 Owner Manual for this synth, which is included in the sale.  

Packing & Shipping: 

We can ship this Juno 106 worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  There may be some short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote.

Sales Price: 

£1,700 GBP

As this is a brokered sale, VAT is not applicable on the sale of this Juno 106 to UK buyers, however, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped to you.

Availability: 

This Roland Juno 106 is now SOLD.  This loisting was updated on Wednesday 24th January 2024 @ 09:56 GMT.

Click on the thumbnail for a higher resolution photo of the actual Juno 106 for sale.  If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you as the instrument is currently in secure storage.

BUY THIS JUNO 106

Roland SH-3A

We are Brokering this instrument for and on behalf of our UK client.

Service Status: 

A full service was carried out by Kent Spong at KSR Services in October 2023.

Remarks: 

Roland started producing some really unique synthesizers in the mid 1970s, and they were built to a very high standard and certainly have lasted. The SH-3A was conceived as a portable full function analogue synth that had bags of charter and shared much of the same architecture & functionality from the SH-5, SH-7 and even the System 100 etc, so we think this represents excellent value for money.

Background:

Our client purchased this Roland SH-3A new in 1975, so it’s a single owner machine that’s been in their possession for just shy of 50 years, and only ever been used in a home environment.  This is a UK model, so 220~240v, and is hard-wired with a UK 3-pin plug which is stored in the compartment within the flight-case in the underside of the synth.

Servicing:

As mentioned above, Kent at KSR has just going the SH-3A a full service, so it’s perfectly working and sounding like a SH-3A should, and he commented that the synth is in beautiful condition inside and out.

Condition:

We rate this as in excellent all original condition, unmodified and complete with its music stand, lid and original owner manual, so very much a collectors grade instrument, that’s ready to play.

Documents:

Although we don’t have the original sale receipt from 1975, the synth does come with its original user manual.

Packing & Shipping: 

We can ship this SH-3A worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  There may be some short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  You are also welcome to collect the SH-3A from us in Reading.

We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote.

Sales Price: 

£1,050 GBP

As this is a brokered sale, VAT is not applicable on the sale of this SH-3A to UK buyers, however, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped to you.

Availability: 

This Roland SH-3A is available for sale now.

Click on the thumbnails for a higher resolution photo of the actual SH-3A for sale.  These two images are supplied by our client pre-servicing but we will be organising some more pictures shortly, so we’ll update the  listing with these once ready.

If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you as the instrument is currently in secure storage.

BUY THIS ROLAND SH-3A

Schmidt 8-Voice

We are Brokering this limited production run and modern classic for and on behalf of our UK client.

Service Status: 

Full health-check to be carried out post-sale.

Remarks: 

We present a fabulous opportunity to own a mint condition 2018 production version Schmidt 8-Voice Polyphonic Synthesizer – Serial number 057. There were only 100 Schmidt 8-Voice manufactured, in batches of 25 at a time, so this example came from the third production run, assembled and shipping from Schmidt during 2018.

About the Schmidt 8-Voice Polyphonic Synthesizer:

Schmidt themselves have a website dedicated to this incredible instrument, so we would recommend you click the link below to find out all about what makes this already a classic and among one of the most highly desirable synthezisers ever made:

https://www.schmidt-synthesizer.com/en/

Background:

Our client purchased this Schmidt 8-Voice in December 2017, and as the instrument was built to order for them, they took delivery of it on 21st September 2018. It has resided in a home studio since then and kept under a dust cover when not in use, so is in as-new condition with actually very little use. Our client confessed that due to demands of running his own business, he has not had much time to actually play the Schmidt, and feels it should go to someone else who can get better use from it.

It was originally shipped from Schmidt securely contained within a custom flight-case, and our client had retailed that, so the instrument will be supplied with this case as part of the sale.

We have a copy of the original sale s receipt which might be available to the new owner, subject to our clients approval as it does contain personal details of course, but this forms part of the instruments provenance.

Health-Check:

As this is an almost new machine, we will not be needing to carry out any maintenance on the Schmidt, but it will be fully tested by us prior to handing it over to the new owner.

Condition:

As new – mint condition.

Packing & Shipping: 

We can ship this Schmidt 8-Voice worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  Due to the sheer size and weight of the flight-cased instrument, we would recommend having it custom crated and palleted for shipping overseas.  UK buyers would be able to collect it from us in Reading and/or we might be able to deliver it in person, depending on your location, and subject to quotation.

We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote.

Sales Price: 

£19,990 GBP

As this is a brokered sale, VAT is not applicable on the sale of this Schmidt 8-Voice to UK buyers, however, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped to you.

Availability: 

This Schmidt 8-Voice is no longer available for sale.  This listing was updated on Wednesday 6th March 2024 at 13:07 GMT.

Click on the thumbnail for a higher-resolution photo of the actual Schmidt 8-Voice for sale – these were supplied to us by our client.  If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you.

BUY THIS ARP SCHMIDT 8-VOICE

Arp 2600 + 1621 Sequ...

We are Brokering these vintage Arp instruments for and on behalf of our UK client.

Service Status: 

A full service was carried out by Jim McKenna of Singing Cat Services in May 2023.

www.singingcatservices.co.uk

Remarks: 

We present a fabulous opportunity to own a stunning condition late production version Arp 2600 that comes partnered with its companion keyboard controller, the 3620. In addition, this beautiful 2600 is complete with the 1621 Sequencer. This iteration of 2600 represent the final production version, often referred to as the ‘Black & Orange,’ or 2601 v2.0 (possible v3.0)

This production version contains the post-lawsuit Moog 4072 style filter. This instrument is at least 43 years old (likely built in 1979).

Background:

Our client purchased this Arp 2600/3602 and 1621 Sequencer together brand new from Chase Music in Manchester on 16th January 1980 – we have the original sales receipt, although will not publish this as it contains personal data, but it will be provided to the buyer of this Arp combo. The provenance is therefore perfect for this 43+ year old equipment. 

Our client had assembled a modest & much valued vintage synth collection over the years, all of which we have the honour for selling for him as he has made the difficult decision to let these instruments pass to new owners/custodians. These beauty vintage Arp instruments have all been cherished, played & enjoyed only ever at home, during his 43 years of ownership.

Servicing:

As mentioned in the introduction, the Arp 2600 Synth, 3602 Keyboard and 1621 Sequencer, all went through a complete professional service by Jim McKenna Singing Cat Services in April/May 2023, as part of the pre-sale diligence in getting it ready for sale and be in top operational condition for the new owner. We have been provided with a service report against the works carried out at Singing Cat Services, so please clock the link below so you can open up the PDF:

Singing Cat Services Service Report – Arp 2600 & 3620 #2602/0208 PDF.

Singing Cat Services Service Report – Arp 1621 Sequencer #1621-01121 PDF.

Also, our client had James Walker at Synth Repair Services carry out a minor service service on the 2600 on 18th April 2016. We have the original receipt so will provide this to the new owner pos-sale but again, we will not publish this online as it contains personal data,

Condition:

We consider all three instructs to be in outstanding condition, stunning, but you can decide yourself by looking at the pictures below. As province goes it does not get any better than a single owner instruments, and they are all 100% completely original machines, so no mods, so true survivors and highly collectable like this.

The Tolex covering on both the synth and keyboard is in exception condition with only some tine blemishes in places, and the nick plated fixtures and fitting are all present and have the expect patine for an instrument of this age. The console surfaces for both instruments is exemplary and all the original control knobs and slider caps are present.

The 1621 Sequencer is also in absolutely top cosmetic condition, probably the very best example we have seen, and is also equipped with all it’s original slider caps and program buttons, which are so bright and white they look like new!

Documents:

Our client had retained all the original documents since he purchased the Arp in 1980, so the following documents will be provided with the synth post-sale (see picture below):

For 2600 & 3620:

Arp 2600 Owners Manual (dated 1971) 

Arp 3620 Keyboard Owners Manual (dated 1977) 

Chase Musicians – Original Sales Receipt from 6th January 1981 (held off-line)

Magazine article/review on the 2600

For 1621 Sequencer:

Arp Sequencer Owners Manual (dated 1975)

Arp Promotional Colour Brochure (period produced)

Chase Musicians – Original Sales Receipt from 6th January 1981 (held off-line)

Synth Repair Services – Service receipt from 18th April 2016 (held off-line)

Accessories Included:

Included with the sale of the Arp 2600 & 1621 Sequencer is an assortment of cables, 12 in all of differing lengths, which will get you started with you patching. The only proviso on these OE cables are that they are at least 43years old so may not be reliable. We do not cover these parts under any warranty against defects, so we would recommend you purchase some new 3.5mm cables for a more reliable operation as we consider these parts as consumables in real terms.

In addition to the patching cables,  there are 2 foot-pedals included, one is an OE Arp pedal and the other is a third-party device. As with the cables, we do not cover these items under warranty but they are included within the sale as a courtesy.

Health-Check:

As this Arp 2600 3260 & 1621 Sequencer were serviced in May this year, so all items does not need any further attention, but as part of our post-sale process, we will ask Kent Spong at KSR to carry out a health-check on the Arps once the sale has completed.  This will add a couple of weeks to the post-sale timeline.

Both the Arp 2600 & 1621 Sequencer operate on EU220V~UK240V. The 2600 comes with a proprietary power-cable that has a UK type plug fitted to it and the sequencer is supplied with a UK tyre IEC cable.  

Packing & Shipping: 

We can ship this Arp combo worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  There may be some short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  You are also welcome to collect the equipment from us in Reading.

We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote.

Sales Price: 

£15,690 GBP

As this is a brokered sale, VAT is not applicable on the sale of this Arp combo to UK buyers, however, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped to you.

Availability: 

This Arp 2600, 3260 Keys & 1621 Sequencer are both SOLD.  This listing was updated on 8th November 2023 @ 10:39 GMT.

Click on the thumbnail for a higher resolution photo of the actual vintage Arp instruments for sale.  If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you as the instrument is currently in secure storage.

BUY THIS ARP 2600+SEQ

Minimoog #11549

We are Brokering this instrument for and on behalf of our UK client.

Service Status:

A full service was carried out by Jim McKenna of Singing Cat Services in May 2023.

www.singingcatservices.co.uk

Remarks: 

It’s a rare opportunity these days for us to handle a vintage Minimoog, so not a clone or re-issue but the real deal, and we are very pleased to be able to offer this late production version of vintage Minimoog (serial number 11549). 

Background:

Our client purchased this Minimoog new from a music retailer in Carlisle on 28th January 1980 – we have the original sales receipt, although will not publish this as it contains personal data, but it will be provided to the buyer of this Moog. The provenance is therefore perfect for this 43+ year old Minimoog, and the serial number being #11549 places it towards the end the production runs from Moog, so offered the final evolution in terms of the architecture. 

Our client had assembled a modest & much valued vintage synth collection over the years, all of which we have the honour for selling for him as he has made the difficult decision to let these instruments pass to new owners. The Minimoog has been cherished, played & enjoyed only ever at home, during his 43 years of ownership.

Servicing:

As mentioned in the introduction, this Minimoog went through a complete professional service by Jim McKenna Singing Cat Services in May 2023, as part of the pre-sale diligence in getting it ready for sale and in top operational condition for the new owner. We have been provided with a service report against the works carried out at Singing Cat Services, so please clock the link below so you can open up the  PDF:

Singing Cat Services Service Report – Minimoog #11549 PDF.

Condition:

You can decide by looking at the pictures below on how to measure this but we’d rate it as a very good all original survivor machine, so no overt restoration to the wood cabinet and all original controls with no modifications. As we are moving towards half a century on the age of many of these vintage Minimoog, the value of them being completely factory stock would have more appeal that highly restored examples.

The cabinet has a lovely aged patina and the main control surfaces are all in superb condition. There is an insert missing from one of the control knobs on the VCO 3 Waveform,  and some of the other knobs inserts have oxidised a little, but new replacement parts can still be easily purchased on line should you wish t address these minor blemishes. The aluminium chassis and surround are all in great shape, and all look perfectly in keeping for an original Moog synthesizer from the late 1970s.

Dud to its age and originality, we feel these vintage instruments should not be over restored, but if you prefer to have the wood cabinet fully refurbished then please contact us about this as we can get a quotation from Kent at KSR to have this carried out.  The treatments to the cabinet usually require the original varnish and stain to be removed, the wood rubbed down to remove as much of the signs of wear, and then restrained and waxed to finish. The results are very good, beautiful, but not everybody likes this kind of restoration anymore, so let us know if this is something you would like to consider and we’ll gather a quote.

You may notice from the photos that one of the waveform selector knobs is missing its silver insert, this came out recently and wasn’t available to us at time of photographing the Moog for this sales listing. We do have a new replacement knob for this, so it will be fitted to the Minimoog at point of sale, with no charge of course.

Documents:

Our client had retained all the original documents since he purchased the Minimoog in 1980, so the following documents will be provided with the synth (see picture below):

Minimoog Operation Manual (dated 1978) with also includes schematics and some service notes on how to calibrate it.

Minimoog User Patch-book (dated 1977) 

Minimoog Sound Charts Booklet

Studio Sound Magazine article (dated Nov 1972)

Health-Check:

As this Minimoog was recently serviced in May this year, the synth does not need any further attention, but as part of our post-sale process, we will ask Kent Spong at KSR to carry out a health-check on the Moog once the sale has completed.  This will add a couple of weeks to the post-sale timeline.

This Minimoog can run either EU220V or US110V (switchable) and has a UK type plug fitted to the power chord.  

Packing & Shipping: 

We can ship this Minimoog worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  There may be some short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  You are also welcome to collect the Minimoog from us in Reading.

We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote.

Sales Price: 

£5,700 GBP

As this is a brokered sale, VAT is not applicable on the sale of this Minimoog to UK buyers, however, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped to you.

Availability: 

This Minimoog is now SOLD.  This listing was updated on 3rd August 2024 @ 13:19 GMT.

Click on the thumbnail for a higher resolution photo of the actual Minimoog for sale.  If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you as the instrument is currently in secure storage.

BUY THIS MINIMOOG

Juno 60 + JSQ-60

We are Brokering these instruments for and on behalf of our UK customer

Servicing Status: KSR has already carried out a full service on this in July 2023.

Remarks: This Roland Juno 60, JSQ-60 and Boss KM-60 were purchased by our client brand new (from our Client’s memory) around 1983 from a music shop based in Chelmsford, and all three items have only ever been used in the home.  The cosmetic condition is outstanding for all three machines, pristine and almost (if not) as-new condition. These are usable vintage instruments, so they have intrinsic value as such but the condition of this collection more than qualifies as something a collector would cherish.

We are going to try and sell this collection as a bundle for two reasons; 

Firstly as they were all bought together and have been used together for 40 years, so it would be ideal to not split them up if possible.

Secondly, as these actually all make excellent partners in terms of operating and mixing, especially with that stunning condition analogue keyboard mixer, the KM-60

The summary prices below offer a bundle price or the option to buy separately.

The Juno 60

The design of the Juno 60 has to be one of the best Roland ever produced in terms of simplicity of sound design and warmth of character. The Juno 60 has been a ‘go-to’ synth for working musicians wanting that vintage sound for quite a while now.  It kind of defies logic that a DCO synth could deliver such a lush and musical tone, and it won the hearts and minds of all synthesists who’d had the opportunity to own or play one. 

This is, we feel, the cleanest all original example we have had through our business, with the buttons and keys so clean and white, it’s like looking at a brand new machine. Included in the sale is the original Roland Patch Program Data Cassette and owner’s manual.

This synth sounds and operates like all Juno 60 should, and KSR has fully serviced the synth, so it’s 100% working perfectly and good to go.  Aside from the DCB Port, there is no modern MIDI retrofit to this example, but as it’s in such beautiful original condition it would be such a shame to drill holes into the pristine metal panel.  Kenton still produces a Pro-DCB MIDI converter, so we would recommend going this route to maintain the originality for MIDI functionality, but if you must have a more sophisticated MIDI access then please call and speak to us about what options are available and costs etc.

The price has been agreed with our client to reflect the outstanding condition as we both recognise this to be a vastly superior quality example to what most people are trying to sell online around the world. 

The Juno JSQ-60

This was Roland’s solution to a dedicated polyphonic sequencer for the Juno 60, which connects via the proprietary DCB port on the synth from a Roland sequencer. A useful 2000-step unit that’s simple to use and an effective partner for its time.

As you can see from the photos, the unit comes still contained within its original EO retail packaging. The cosmetic condition is excellent with only tiny areas showing any imperfections, and we have provided some photos below that show all angles of the sequencer so you can get a feel for it’s overall quality.

KSR has fully serviced the synth, so it’s 100% working perfectly and good to go, and we have purchased a brand new 9V DC 1A external power supply (UK model) for this, which is included in the price.

The Boss KM-60 6-Channel Analogue Mixer

A very well-known and sought-after analogue mixer that Boss produced in the late 1970s. It’s a stereo 6-channel machine that offers onboard EQ, effects send and panning,  some lovely VU-meters and a beautiful aesthetic that fits perfectly with the Juno-60 and JSQ-60.  There’s a lot of love for this little mixer, we used to own one back in the day so know it well and have fond memories of our ownership. Certainly, you can buy a lot more ‘mixer’ these days, but period-correct equipment has a unique appeal and the KM-60, especially in this condition, is very much collectable and only set to become more desirable as the years go by.

As you can see from the pictures, it’s is fantastic cosmetic condition with only the smallest evidence that tells you this mixer is over 40 years old.

KSR have fully serviced the mixer, cleaned all the potentiometers and jack-sockets and re-capped the PSU, so it’s 100% working perfectly.  We all know that mixers impart a lot of character to the tone of the instruments used through them, and the KM-60 was produced with the Roland product set being sold at that time in mind, so the Juno-60 is the perfect partner for it. Its a trackable mixer but this example has never been used that was so is completely unblemished…stunning.

In Summary:

The Juno 60, JSQ-60 and KM-60 are all sold through RL Music with a 3-month warranty and operate on EU/UK 220v~240v. 

Our client, the owner, also provided original printed copies of the Juno-60 Owners Manual and the JSQ-60 Owners Manual, although the latter shows some historic water damage to the paper. 

The Juno-60 and KM-60 use a hard-wired flex that terminates to a UK-style 3-pin plug. They are able to operate within the EU without any external power-regulation transformers, although your own country-type plug would need to be fitted. The JSQ-60 operated from a brand new 9V DC 1A external power supply (UK plug-type version).

Packing & Shipping:

We can ship Juno 60, JSQ-60 and KM-60 worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  There may be short delays in getting the packaging materials produced for shipping as they are custom-ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements, so please email us if you have any questions on the logistics and/or need a quote.

Price: 

Bundle Price for all two items is  = £3,500 GBP.

Individual Sales Price:

Roland Juno-60 = £3300

Roland JSQ-60 = £400

Availability: Juno 60 and JSQ-60 are available for sale now. The  KM-60 is now SOLD.

As this is a brokered sale, VAT is not applicable on the sale of any of these items to UK buyers. However, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped to you.

Click on the thumbnail for a higher-resolution photo of the actual Juno 60, JSQ-60 and KM-60 for sale.

BUY THIS ROLAND COLLECTION

Yamaha CS-70M

We are Brokering this instrument for and on behalf of our UK customer

Servicing Status: KSR have carried out a full service this CS-70M in July 2023.

Remarks: 

This was one of those ‘time capsule’ moments when then owner of the CS-70M turns up with the instrument contained in its original retail packaging, and reveals the best condition example I have every seen in 22 years as a specialist vintage synth dealer. This CS-70M was purchased new by my Client on 25th February 1983. We have an image of the original sales invoice from 1983 (kept confidential but will be supplied to the new owner), along with all the original documentation, so Owners Manual, Service Manual and the colour printed Yamaha Sales Brochure for the CS070M (all pictured below).

The CS-70M has for many people been overlooked, overshadowed by its bigger brother – the CS80, but this instrument has ascended in popularity among aficionados, and we know this synth is highly sought after by those who truly appreciate it.

6 Voice, dual-channel (stereo), aftertouch, 30 memories, ring-mod, chorus & Leslie effects, lowpass, high-pass, and bandpass VCF, fully programmable and with a 4 channel polyphonic sequencer etc.

Those in the know will already tell you that this is one of the finest hybrid analogue polysynths ever made and a work of audio art in its own right.  It shares most of the same technology as the CS80 and many of the characteristics and tonal qualities as well. The big ‘plus’ over the CS-80 is the digital auto-tune facility that snaps the voice cards into tune upon powering up the synth.  These models do not suffer from any wayward tuning issues, so this was a step-change for Yamaha when this hybrid polysynth hit the market, of that over the CS-80 and its pure analogue foibles at least.

There are a few demos on YouTube of these but we like this rather ambient-noodling one from the Channel of MoreAnalog as it demonstrates nicely how the CS70M has that beautiful ambient CS80 vibe we love about this synth: 

https://youtu.be/1_jy9ERBTPs

Background:

As mentioned above, this is a remarkable single owner example that perfectly meets all the criteria to be a fine collectors item, as well as a usable music instrument. This is a completely factory stock survivor machine, so has not been retrofitted with MIDI, so no holes have been  drilled into its pristine case, so this lacks MIDI, but once you buy it then you can decide if that’s important to you to have implemented of if you prefer to retain its originality and collectable value by keeping it original.

The serial number for this CS-70M is: 1654

Condition:

The cosmetic condition of this example is exemplary with no perceivable ageing to the control surfaces. The faux wood laminate cabinet is in outstanding condition, unmarked, We would grade this as in Excellent condition – 10 out of 10 cosmetically…really.

All the original controls, slider-caps, knobs are intact and everything still looks sharp and clean.  We have all the original manuals and other documentation as mentioned above. There is even the small rubber cover for the Keycode port on the rear-panel still in place.

Operational Condition:

Operationally, our trusted and world-renowned ‘Yamaha CS Series’ restoration expert – Kent Spong of KSR, has already carried out a full service on the CS70M, so it’s 100% perfectly working and ready for its new owner now.  Servicing included re-capping the PSU, full system-wide test and calibrations and cleaning of sliders and pots where needed as the synth has been sat unused for some time so it did need some light attention, but we wanted a very light touch with this instrument. 

The only item that we need to report that is non-functional is the magnetic strip reader as there is a custom Yamaha IC that has failed on the reader and that part is no longer available. This is a very common problem on the CS-70M and we don’t currently have any workaround for this, so we are declaring it here so you have full knowledge when considering to to purchase the instrument.

The CS-70M operates from 100V to 240V as there is a switchable PSU switch(s) on the back panel, and this Yamaha is supplied with its original & proprietary 2-pin power cable. The unit has been fully tested under UK 240V conditions at the KSR workshop.

Packing, Shipping, Insurance and Warranty: 

We can ship this CS-70M worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  As this is supplied in its original retail box, then we would have to order a custom sized export-grade cardboard carton that encompasses the OE box as well, so it will be a large and heavy.

There may be some short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote, but you are also welcome to collect it from us in person in Reading, UK.

As the instrument is being Brokered through RL Music, it will be sold with a full 3-month (return-to-dealer) warranty, covering all parts and labour.

Sales Price: 

£10,990 GBP

VAT is not applicable to UK buyers, however, the packing & shipping costs are subject to VAT @ 20%, should you need the goods shipped to you.  

Availability: 

This CS-70M is now SOLD – this listing was updated on Saturday 17th February @ 06:59 GMT.

Click on the thumbnail for a higher resolution photo of the actual CS-70M for sale.  If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you as the instrument is currently in secure storage.

BUY THIS CS-70M

Yamaha DX1

We are Brokering this instrument for and on behalf of our EU customer

Servicing Status: KSR have carried out a full health-check on this DX-1 in June 2023.

Remarks: A good all original condition Yamaha DX-1, which we have previously sold to the current owner but they are now Brokering it back through us for re-sale.

What is there to say on this 1983 flagship synthesizer that has not already been written, but it’s a very rare machine with only 140 reported to have ever been manufactured, so a really unique find in 2023. I terms of some historic information, we have found a useful website that has a dedicated page to the DX-1, which also includes some videos.  If you would like to delve into the back-story on the DX-1 and understand more about it’s capabilities and sounds the please click the link below to find out more:

Classic Gear -The Yamaha DX1: Owning and Recreating the King of FM

We are not affiliated, nor have we contributed or edited any of the information provided in the link above, so this is an independent source for the DX-1 which we hope you find of interest.

Cosmetic Condition:

The overall condition of this example is very good, with the normal amount of wear we would expect to see on a synth this age, size and quality. We sold this DX-1 to our EU customer, so it was shipped out of the UK against the original sale and then was re-imported in May this year, having been sent straight to Kent Spong at KSR for some servicing, where the instrument currently resides. 

The photos below were taken at KSR, so are un-doctored and show the overall presentation.

Operational Condition:

The following declaration is made in good faith and is an honest account of the current operational condition of this example.  

All the controls, LEDs, functions of the control panel work as they should, so LED buttons are all operational.  However,  Bank A Voice 5 button feels slightly different to operate than the others which suggests the component is faulty, but it does function, although it can be intermittent. We are not aware of a replacement for this part as it would appear to be a DX-1 specific component but we are declaring this as a known issue.

The LDC display is fully working with all segments showing properly and brightness is perfectly readable.  The volume LED indicator on the right hand side, next to where to says ‘DX-1  ’ on the front panel has one of the tiny LED segments that is dimmer than all the rest (the 14db) and one that does not work (the 96 db) – I’ve attached a photo I took when we had it set up in the workshop .

The sliders top the right of the instrument all work correctly.

The modulation and pitch-wheel both operate correctly.

The DX- sound engine itself operates correctly.  There are some classic ‘DX’ patches loaded in the system, I did try to edit some sounds and all the edit functions were available are working, although I didn’t save those changes.

The professional weighted 73 note wood keyboard was fully working in terms of triggering notes, and the velocity was 100% working across all keys.

The Polyphonic After-Touch (Poly-AT) is not operating at more than 30% of the keyboard. Kent has gone though each key to check the after-touch sensors and there are many that simply are not working.  Kent at KSR does not currently have any supply for replacements, so this is not something Kent has a resolution for, but the owner is aware and this is factored into the sale price.

In consulting with Kent at KSR on the reality on getting the Poly-AT system fully restored, as I know this would be of interest to any potential buyer,  Kent told me that every DX-1 he had seen had similar issues as there are no replacement parts for the Poly-AT sensors at present.  He said that in the last 6 years he had serviced two DX-1 owned by MI professionals, and both those machines also had significant Poly-AT sensor failures, so it would seem to be consistent with the age of these machines.  I personally would be very suspicious of anyone selling a DX-1 stating that the Poly-AT system was 100% based on this reality.

Summary:

We have seen people advertising the Yamaha DX-1 from £60,000 to nearly £150,000 GBP in recent years, which is eye-watering, but with such a small production run plus is being such an historic instrument with A-list users like Dire Straits and Michael Jackson et al, it’s not hard to understand why people might value them this high.  With the declared operational condition of this particular DX-1 in mind, we have agreed with our Client, the owner, to price this example much more realistically. The price below is not subject to VAT in the UK as this is a commission sale but it might be subject to import duties in your own country, if you are purchasing outside the UK.

This DX-1 has multiple power settings so it’s able to operate in any country around the world without he need for any external power-supplies to step-up or down. We will also supply  a PDF copy of the owners manual.

As the instrument is being Brokered through RL Music, it will be sold with a full 3-month warranty and we can ship worldwide.  

Packing & Shipping: 

We can ship this DX-1 worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so they are subject to quotation.  The synth is located with KSR in the UK, so you are welcome to collect it from then directly if you prefer.

There may be short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument, and for the DX-1, we would recommends having it custom crated and palletised.  We are happy to discuss your requirements, so please email us if you have any questions about the logistics and/or need a quote.

Price: £28.990 GBP

As this is a brokered sale, VAT does not apply to UK buyers. However, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped.

Availability: 

This DX-1 is NOT currently available for sale.

Click on the thumbnail for a higher-resolution photos of the actual DX-1 for sale.

BUY THIS YAMAHA DX-1

E-mu Emulator III

We are Brokering this vintage sampler/workstation for and on behalf of our UK client.

Came into stock: 

February 2022.

Service Status: 

Full service by KSR was carried out in Summer 2021, but a health check will be carried out post-sale.

Remarks: 

First released in 1987,  The Emulator III was the benchmark, state of the art pro-sampler/synthesizer/workstation.  This was a very expensive bit of high-end kit that was used by all the major artists of the day.  Fully utilised for integration with ‘Macintosh’ computers equipped with MIDI, SMPTE, SCSI etc.  Yes, we’ve all moved on from SCSI, and we use DAWs mainly for digital sequencing now, but this was a serious machine for serious musicians in the 80s and was used on countless hit records. 

Winding forward 35+ years, the Emulator III sampler/synth/workstation is still a revered machine, sounds superb with its 16 Curtis 3387 analogue filters, and for aficionados of this genre of equipment, is highly collectable.

Background:

Our client, the owner of this Emulator III, purchased it from a dealer in the USA a few years ago and then wanted to have it fully optimised with a brand new Nalbantov USB floppy disk drive emulator with library installed, a new OLED display and the 4Mb Ram card upgraded to 8Mb so these upgrades are included. 

Condition:

The cosmetic condition is excellent with just some tiny signs of wear to the case & control surfaces.  You can see from the pictures we took that this example is full 100% intact, and in really super condition overall.

Health-Check & Servicing:

As mentioned above, this Emulator III has been through the hands of Kent at KSR back in the summer of 2021, but we will have this fully checked again and any service items needed will be applied, but the PSU was recently re-capped & OLED Display fitted (2021).  Please allow at least 2 to 3 weeks delay once the EIII is sold before we can effect a hand-over to the new owner, or ship it etc.

The EIII operates on either US110V or EU220V. A UK type IEC cable will be supplied in the sale.

Packing, Shipping, Insurance and Warranty: 

We can ship this sampler worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so are subject to quotation.  There may be some short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements so please email us if you have any questions on the logistics and/or need a quote.

As the instrument is being Brokered through RL Music, it will be sold with a full 3-month (return-to-dealer) warranty, covering all parts and labour.

Sales Price: 

£5,000 GBP

As this is a brokered sale, VAT is not applicable to UK buyers, however, the packing & shipping costs are subject to VAT @ 20%, should you need the goods shipped to you.  The EIII can be available for collection from us directly in the South of England (Reading, Berkshire).

Availability: 

This Emulator III is available for sale.

Click on the thumbnail for a higher-resolution photo of the actual EIII for sale.  If you require specific pictures not already featured of the instrument then please contact us so we can try and accommodate your request but there may be a short delay in getting this done for you as the instrument is currently in secure storage.

BUY THIS Emulator III

Roland Jupiter 8 w/M...

We are Brokering this instrument for and on behalf of our UK customer

Coming into stock: Came into stock in February 2022.

Servicing Status: KSR have carried out a service on this Jupiter 8 in February 2023.

Remarks: A beautiful condition Roland Jupiter 8 (12bit model) – Serial Number: 161512, which has been retrofitted with a Groove MIDI kit.

We are always very happy to sell any Jupiter 8 and this one is an excellent representative example that has MIDI as well. What can we say that hasn’t already been written about the JP8…honestly, nothing new.  However, we’ve seen relative values for this flagship vintage analogy poly-synth climb sharply in recent years, so they’ve become unaffordable to most people, which is a real shame.

The overall condition is excellent, with far less than he normal amount of wear we would expect to see on a synth this age, so this example has been very well cared for throughout its existence. The photos below tell the story, but even the base of this JP8 is in great shape.

We discussed the price at some length with our client and agreed keep the sale price as reasonable as is possible for this model, so we think you will find this cheaper by far than any currently available JP8 for sale in the world right now, in comparable condition, with MIDI, fully serviced and sold with a guarantee. 

Our client purchased a Stardust (pictured) cover for the synth to keep it well protected, so this is supplied in the sale.

This JP8 operates on EU220~UK 220V and has a UK type 3-Pin plug fitted.  We will also supply  a PDF copy of the owners manual.

As the instrument is being Brokered through RL Music, it will be sold with a full 3-month warranty and we can ship worldwide.  

Packing & Shipping: 

We can ship this Jupiter 8 worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so they are subject to quotation.  The synth is located with us in Reading, so you are welcome to collect it from us if you prefer.

There may be short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements, so please email us if you have any questions about the logistics and/or need a quote.

Price: £19,710 GBP

As this is a brokered sale, VAT does not apply to UK buyers. However, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped.

Availability: 

This Jupiter 8 is SOLD. This listing was updated on 13th July 2023 @ 15:52 GMT.

Click on the thumbnail for a higher-resolution photo of the actual Jupiter 8 for sale.

BUY THIS JUPITER 8

Oberheim Xpander

We are Brokering this instrument for and on behalf of our UK customer

Coming into stock: Came into stock in February 2022.

Servicing Status: KSR have carried out a service on this Xpander in February 2023.

Remarks: Much has been written on these incredible synthesizers and it’s understandable when you use them as they really can deliver a thick analogue wall of sound, and are perfect pad and brass sources just for starters.

The Xpander lineage includes the Matrix 6 and 12 and is a fully midi configured, 6 voice Polysynth – an excellent addition to any analogue set-up and has to be heard to be believed. he Xpander offers a deep programmable architecture for those of you into tweaking but can also be a very user-friendly hands-on preset machine.  This means they sit between that digital and analogue medium perfectly and are arguably the best of the hybrid technology of the early to mid-1980s.

This example is a USA built unit that works perfectly, and as mentioned above, has just been fully serviced by KSR.  The cosmetic condition is excellent, as you can see from the pictures below, with only minimal wear and marks to the painted surfaces.

This Oberheim Xpander has come to us from a private owner who purchased this from new in 1986, so it’s a single owner machine. 

The Xpander runs on US115~230V (switchable), is supplied with an IEC cable with UK-plug fitted and photocopy of the June 1984 user manual by Daniel Soferan. In addition, an original factory presets cassette is also supplied.

Packing & Shipping: 

We can ship this Xpander worldwide, although the packing, shipping & insurance costs are not included in the sale price below, so they are subject to quotation.  The synth is located with us in Reading, so you are welcome to collect it from us if you prefer.

There may be short delays in getting the packaging materials produced for shipping as they are custom ordered for the specific dimensions of each instrument.  We are happy to discuss your requirements, so please email us if you have any questions about the logistics and/or need a quote.

Price: £4,200 GBP

As this is a brokered sale, VAT does not apply to UK buyers. However, packing & shipping/insurance is subject to VAT @ 20% should you need the goods shipped.

Availability: 

This Xpander is now SOLD.  This listing was updated on Thursday 9th March 2023 @ 09:06 GMT.

Click on the thumbnail for a higher-resolution photo of the actual Oberheim Xpander for sale.

BUY THIS OBERHEIM XPANDER